|
|
Mott Corporation FCC Slurry Oil Filtration
|
||
| Slurry Oil Filtration | Porus Metal Filter Elements | Laboratory Testing Products | Home |
| Catalyst Recovery | Unique Porous Media | Back to Oil Filtration | |
 |
Mott laboratory equipment is available for pilot and feasibility studies to determine performance of cleanable filter media in new applications. The life of a filter can be considerably reduced by incorrect operation. It is important to know the limits of recommended operating rates to ensure an appropriate life and the associated economic return. Results from testing with Mott laboratory products can be directly scaled to a larger pilot unit or, in many cases, applied directly to the final product – a full-scale filter system installed at your facility. Such testing can be performed by a Mott applications engineer at our facility in Farmington, Connecticut, or directly at the customer’s site. The schematics provided within this brochure will take you step-by-step through the process, operation and flow schemes for various applications which utilize Mott laboratory products. Process conditions such as solids loading, terminal and backwash pressures, as well as effluent quality, can be quickly and easily determined. | |
 |
|
|
|
|
||
 |
 |
|
||
|
|
|
|
||
| Lab Development - Filter system design usually begins at the Mott Laboratories, where our engineers analyze the results of small-scale runs, using actual samples provided by customers. | Pilot scale test - The next step is a pilot-scale filter at the customer's site to ensure compatibility with actual process conditions. | Final product - Once final operating conditions are determinded, the full scale production systems is shipped and installed, after which Mott audits on-line performance to ensure that all operational specifications are fully met. | ||
Mott HyPulse® LSX Laboratory Filters |
||||
| Mott Laboratory LSX crossflow filters are ideally suited for process testing and for low-flow applicatioins such as liquid sampling. Accurate scale-up to production from a single element test model is possible, as each element acts independently. | ||||
|
|
||||
|
Design Advantages
|
Flexibility (features / benefits)
|
How it works
|
||
|
|
The contaminate liquid feed stream is pumped through the inner diameter of the tube at a velocity ranging from 5-20 ft/sec. The differential pressure across the element will cause a protion of the flow to pass through the filter media and exit as clear filtrate, free of particulate. Fine particles are prevented from penetrating into the depth of the porous media and suspended within the contaminated feed stream. The crossflow velocity creates inertial forces on the solid particles that carry the particulate through the inner diameter of the porous element and out with the contaminated process fluid. This continuous crossflow velocity prevents premature fouling of the filter media. | ||
 |
|||||||||||||||||||||||||||||
| Configuration | |||||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||
| Specifications | |||||||||||||||||||||||||||||
*Other media grades available upon request |
|||||||||||||||||||||||||||||
| Suggested performance specifications | |||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||
| Recommended flow scheme | |||||||||||||||||||||||||||||
 |
|
|||||||
Mott 70mm Disc Test Filter
|
||||
perfect for: laboratory bench scale testing, feasibility studies, and small-scale batch-type processes |
||||
| Mott's unique bench-top filter, our 70mm disc filter, is the simple, inexpensive way to effect liquid-solid and gas-solid separations with either vacuum or pressure. The first step to larger pilot and process systems, this filter offers an impressive array of benefits. | ||||
| Design Advantages | How it works | |||
|
 |
The 70mm disc test filter is a barrier type filter. The lab data can be used to scale up to LSI, LSM, or LSP filter systems. Contaminated product enters the test filter and particulate is trapped on the surface of the porous disk while clean fluid ixits the unit. As contaminant builds on the filter media, fluid flow will decrease (under constant pressure) or pressure drop will increase (constant flow). At terminal conditions, flow is reversed to dislodge the filter cake and remov e it from housing. | ||
| Flexibility (features / benefits) | Configuration | |||
| The Mott 70mm disc filter is capable of operating in a variety of modes depending upon separatiion requirements.
|
 |
|||
| Specifications | ||||
| Ratings | |||
Pressure |
150 PSIG (1034 KPa) |
Operation Schematic |
|
|
|
|||
| Vacuum | -14.7 PSIG ( Full ) |
 |
|
| Temperature | 250 F | ||
| Media Grades | 0.2, 0.5, 1, 2, 5, 10, 20, 40 | ||
| Active disc diameter | 2.37" | ||
| Active porous area | 4.41 in2; 2805 cm2; 0.031 ft2 | ||
| Reservoir capacity | Slurry - 140 cc , Filtrate - 70 cc | ||
| Assembled weight | 4.4 lbs | ||
 |
|||
| Overall height | 3.9" | ||
| Inlet & Outlet connections | 1 / 2" NPT | ||
| Flow rate | 116 cc / min=0.031 GPM | ||
HyPulse HyLine ™Filters |
|||
| Application versatility. | |||
| The Mott HyPulse HyLine filter can separate solids from liquids and gases in a wide variety of applications. Uses include process filtration, sampling filters, polishing filters, and slipstream test filtration from which the data can be used to specify and / or design full-scale process filters. | |||
| Features and benefits. |
HyLine Filter
|
Cylindrical element
|
|
|
 |
 |
|
|
Applications
|
|||
|
|
||
|
Visit our other sites: jbii.com , jbsystemsusa.com © 2006 JB Systems, Inc. | 110 Corporate Park East Dr. | LaGrange, GA 30241 (706) 884-3006 | Fax: (706) 884-3067 | Toll Free: 1-800-868-6204 E-Mail: sales@jbsystemsusa.com |
||
