Filterdyne

F - 125 Fixed Systems

Filter Vessels Oil Purification Systems Central Lubricating Systems

Filtration Systems Filtration and Separation Systems Home


The F-125 Oil Filtration System series can be used to clean oil reservoirs and transfer oil between reservoirs without contamination. These systems will remove water and particulate down to 1/2 micron. Systems available in 2 and 5 GPM capacities.


The 757 series features the following:
  • Welded Steel Construction
  • Epoxy Coated Corrosion Resistant Interior
  • Self priming positive displacement pump with relief valve 
  • Threaded base elements with positive seal O-rings
  • Many replacement element choices
  • One set of 5 micron elements included
  • Power cords provided on single phase modes
  • Totally enclosed fan cooled motor
  • On/Off switch or motor starter
  • Differential pressure gauge
  • 0-160 PSI pressure gauge
  • Hoses included
  • Motor starter with overload on 3 phase models

Standard System Specifications

Model Number

Pump

Motor

Elements with Unit

Hoses

Power Cord

Weight

Dimensions (WxLxH)

F125-725

2 GPM

1/4 HP 110 Volt 60Hz, TEFC

FE-618-562 (1 each)

3/8" In/Out 10'

10'

75 lbs.

15"x18"x37"

F-125-768

5 GPM

1/2 HP 110 Volt 60 Hz, TEFC

FE-618-562 (1 each)

1" In/Out 10'

10'

75 lbs.

15"x18"x37"



Single Length Filter for F-125 Systems


Element Number Media

FE-618-566 1/2 Micron Pleated Paper
FE-618-563 1 Micron Pleated Paper
FE-618-562 5 Micron Pleated Paper
FE-618-576
10 Micron Pleated Paper
FE-618-615 25 Micron Pleated Paper
FE-618-569
5 Micron Waterlock
FE-618-570 Activated Clay



Visit our other sites: jbii.com , jbsystemsusa.com
solventrecoveryusa.com, vacuumpumpusa.com,
water-filtersystems.com, wastewater-filtration.com,
liquidfiltration-products.com, jbiit.com


© 2006 JB Systems, Inc. | 110 Corporate Park East Dr. | LaGrange, GA 30241

(706) 884-3006 | Fax: (706) 884-3067 | Toll Free: 1-800-868-6204

E-Mail: sales@jbsystemsusa.com